SF Vertikal Eco


The all-rounder from Hirl

The SF Vertikal Eco is the most versatile of the Hirl mixer wagons. With sizes from 13m³ to 40m³ and numerous, selectable additional options, it can be precisely adapted to the needs of your company.

From all-wheel drive and steering, road approval up to 40 km / h or a more powerful engine, to heated exterior mirrors, there are many other optional equipment to adapt the SF Vertikal Eco exactly to your needs.


individual solutions


Technical specifications

Mixing 1 or 2 verticale mixing augers with 2 speeds
Milling 420bar high performance feed rotor, width 2,00m with 700mm conveyor belt
Discharge Chain conveyor left side or transverse at the rear
Engine Dieselengine IVECO NEF (Stage 5), 4 or 6 cylinders
Hydraulic Linde hydraulics, 2-fold pump distributor gearbox
Chassis Front wheel drive, hydraulically suspended front axle, speed up to 20 km/h
Tyres 385/55 R 19,5 front and rear

Model

Model Volume Auger Width Heigth Length Weight
SF Vertikal Eco 1100 11 m³ 1 2500 mm 2800 mm 7300 mm 8.900 kg
SF Vertikal Eco 1300 13 m³ 1 2.500 mm 3090 mm 7.300 mm 9.400 kg
SF Vertikal Eco 1600 16 m³ 1 2.500 mm 3.400 mm 7.300 mm 10.000 kg
SF Vertikal Eco 1800 18 m³ 1 2.800 mm 3.150 mm 7.700 mm 11.200 kg
SF Vertikal Eco 2100 21 m³ 1 2.800 mm 3.490 mm 7.500 mm 11.500 kg
SF Vertikal Eco 1400 14 m³ 2 2.100 mm 2.750 mm 9.050 mm 11.400 kg
SF Vertikal Eco 1800 18 m³ 2 2.100 mm 3.000 mm 8.850 mm 12.100 kg
SF Vertikal Eco 2200 22 m³ 2 2.350 mm 2.950 mm 9.500 mm 13.000 kg
SF Vertikal Eco 2600 26 m³ 2 2.500 mm 3.100 mm 9.750 mm 13.500 kg
SF Vertikal Eco 3000 30 m³ 2 2.500 mm 3.300 mm 9.650 mm 13.950 kg
SF Vertikal Eco 3200 32 m³ 2 2.500 mm 3.400 mm 9.400 mm 14.350 kg
SF Vertikal Eco 4000 40 m³ 2 2.800 mm 3.590 mm 9.900 mm 14.750 kg

 

Details may vary depending on equipment, technical changes reserved.


The Vertikal Eco is one of the most energy-efficient mixing wagons on the market thanks to the longitudinal alignment of the motor and the associated simple mechanical drive of the mixer.

The simple structure and the electronics that have been reduced to a minimum make the Vertikal Eco service-friendly and inexpensive to maintain.

Due to its low height and compact design, the Vertikal Eco is ideally suited for narrow spaces and small buildings.


A rear discharge with a cross conveyor belt is optionally possible instead of a side discharge.

The maintenance-free high-performance milling machine works with a milling pressure of up to 450 bar, removal heights in the silo are possible up to 4,5 m.

The narrow wheelbase and compact length make the Vertikal Eco extremely manoeuvrable. Registration as a self-propelled machine up to 25 km / h is possible again.