T Horizontal Eco und EcoF

with or without milling cutter


Robust, compact and uncompromising

The T Horizontal Eco is a little lighter and the electronic remote control has been replaced by an uncomplicated Bowden cable control.

The rear axle makes it extremely manoeuvrable and the smaller models in particular are the ideal solution for small and medium-sized businesses with old buildings.



Models with a milling machine

  Volume Width Heigth Length Weight
T Horizontal EcoF 600 6 m³ 2.150 mm 2.295 mm 5.320 mm 4.600 kg
Horizontal EcoF 800 8 m³ 2.150 mm 2.395 mm 5.840 mm 5.000 kg
Horizontal EcoF 1000 10 m³ 2.240 mm 2.495 mm 6.310 mm 5.500 kg
Horizontal EcoF 1300 13 m³ 2.330 mm 2.610 mm 6.740 mm 6.400 kg
Horizontal EcoF 1600 16 m³ 2.480 mm 2.710 mm 7.210 mm 7.100 kg
Horizontal EcoF 1800 18 m³ 2.480 mm 2.810 mm 7.390 mm

7.800 kg

Details may vary depending on equipment, technical changes reserved.

Models without a milling machine

  Volume Width Heigth Length Weight
T Horizontal Eco 700 7 m³ 1.800 mm 2.595 mm 4.790 mm 3.900 kg
Horizontal Eco 900 9 m³ 1.900 mm 2.695 mm 5.310 mm 4.300 kg
Horizontal Eco 1200 12 m³ 1.870 mm 2.795 mm 5.790 mm 4.700 kg
Horizontal Eco 1500 15 m³ 2.000 mm 2.910 mm 6.220 mm 5.300 kg
Horizontal Eco 2000 20 m³ 2.100 mm 2.910 mm 6.690 mm 5.900 kg
Horizontal Eco 1800 18 m³ 2.200 mm 2.910 mm 6.870 mm

6.400 kg

Details may vary depending on equipment, technical changes reserved.


Counter-rotating mixing screws

The attached T Horizontal Eco mixes with two counter-rotating mixing screws.

Extra sharp knife

The mixing augers are equipped with extra sharp knives in order to guarantee an accurate cutting and mixing of all feed components.


A flexible and affordable solution

• Outfeed conveyor left, right or both sides

• electronically programmable weighing device with 7 recipes with 12 components each

• Weighing indicator mounted on a rotating bracket

• Attach the ladder to the front to check the filling level of the mixing tub

Solid and durable

• Mixing screws in steel ST 52.3

• Mixing tub in steel ST 52.3

• Mixing screws with gear reduction running in an oil bath

Filling the mixing container

available with or without milling cutter

Milling machine with working widths of 1.50 m or 1.80 m